Frequently Bought With
.jpg)
- 013010000
Model 9, Coalescing Cartridge,Reman - 3-YEAR WARRANTY
- Remove dust cap and release bolt from side of the center section. Re-attach the washer and nut to the bolt.
- Then, you must SECURE the brake chamber on a table and apply between 100-120 psi to the parking side inlet port marked PARKING / 12. Maintain this pressure throughout this caging procedure.
- Once properly seated, screw the nut and washer up to the housing, by hand at first while sure the T-end remains seated inside the spring plate groove.
- With a hand wrench, torque the release bolt nut to ±20 ft-lbs. NEVER use an impact wrench as you will likely damage the unit and/or possibly cause the main spring to release, potentially causing bodily harm.
- The RELEASE BOLT is now holding the parking spring in the collapsed position so you can SLOWLY RELEASE the air pressure from the unit.
- 107796PGBXWBW107796PGBX107794PGXBX107796PG
- Warranty Time Period1 YearWarranty CodeB
Customers Also Viewed
Part #034048
For pricing, please contact your local branch at (214) 630-8360
Choice
Part #OTRS-F31SX
Best Seller
Part #15E2E1
Choice
Part #PTAF-2301R
Related Searches